Bangladesh Limited

Multi-brand service

MAN turbochargers

Overhaul, repair and spare parts for the NR, NA, TCA and TCR series — in our workshop, at the plant and on board ships at anchorage.

  • NR
  • NA
  • TCA
  • TCR
15+
Years of field and workshop experience
G0.4
Finest ISO 21940 balancing grade
9
Turbocharger makes serviced
24/7
Emergency support

Our focus

From the workshop to ships at anchorage

Our MAN work reaches beyond the workshop: a TCA66 that had seized after its turbine-end radial bearing failed was repaired on board a vessel at the Kutubdia anchorage, then tested and commissioned, and the ship sailed on.

  • TCA66 breakdown repaired on board — Kutubdia anchorage
Dismantling a turbocharger

MAN

Series and models we service

NR
NR12NR12/RNR12/SNR14/SNR15NR15/RNR17/SNR20NR20/RNR20/SNR24NR24/RNR24/SNR26NR26/RNR26/SNR29/SNR34/RNR34/S
NA
NA34/KNA34/SNA34/TNA40/SNA40/TNA48/SNA48/TNA57/TNA70
TCA
TCA33TCA44TCA55TCA66TCA77TCA88
TCR
TCR12TCR14TCR16TCR18TCR20TCR22

Series names identify the equipment. RotoTech is an independent service provider, except where an authorization or distribution agreement is stated.

In our workshop

What we do with a MAN turbocharger

01Dismantling & inspectionControlled dismantling and detailed component inspection.
02CleaningUltrasound, high-pressure water-jet, hot-water and dry-ice cleaning, chosen for each part.
03Crack detectionMagnetic particle and dye-penetrant checks on shafts, wheels and casings.
04Refurbishment & partsBlades, nozzle rings, shroud rings, diffusers, shafts and hoods restored, or replaced with genuine or compatible parts.
05BalancingRotor balanced to ISO 21940 grades G0.4 and G2.5.
06Reassembly & testPrecision reassembly, then testing before the unit goes back into service.
07ReportFindings, measurements, photographs and recommendations in a turbocharger inspection report.

Our work

MAN jobs in Bangladesh

RotoTech engineer on a large turbocharger

MAN TCA66 at Kutubdia anchorage

On a Greece-flagged vessel at the outer anchorage of the Kutubdia deep-sea area, the MAN TCA66 rotor had seized after the steel radial bearing on the turbine end failed, damaging the turbine blades and shaft, every bearing component, the nozzle ring and the shroud ring. The ship could not sail.

Our marine service team replaced the damaged parts on board, reassembled and tested the turbocharger and commissioned it; it ran normally and the vessel continued its voyage.

  • Marine · 2025

    Greece-flagged vessel, Kutubdia anchorage

    MAN TCA66 breakdown: seized rotor; damaged parts replaced, unit reassembled, tested and commissioned on board.

Spare parts

Genuine or compatible

We supply parts for every make we service: genuine Napier spare parts and turbochargers as Napier's authorized service provider, the Garrett range as Garrett's master distributor in Bangladesh, and genuine or compatible parts across the other supported models.

Genuine

The turbocharger maker's own part with its reference — the choice when an operator, class society or contract requires it.

Compatible

An interchangeable alternative to the original reference, chosen to cut cost or lead time, and named as such on the quotation.

01IdentifyTurbocharger type, serial number and the part — a photo of the rating plate is the quickest start.
02QuotePrice, lead time and whether the part is genuine or compatible, in writing.
03SupplyDelivered to your plant or ship, or fitted in our workshop.

FAQ

Frequently Asked Questions

Do you service turbochargers on ships?

RotoTech Bangladesh Limited has recently achieved a significant milestone in the marine engineering sector by successfully completing a complex MAN TCA66 turbocharger breakdown service on a Greece-flagged vessel at the outer anchorage of the Kutubdia deep-sea area.

How often should a turbocharger be overhauled?

Most of the basic required information is available in rating plate of turbocharger. e.g. Turbocharger type, service interval, rotating component (bearings, shaft & compressor) safe life means exchange interval, operating safe speed & temperature etc also can know from turbocharger rating plate information.

To what balancing grade do you work?

Precision dynamic balancing of axial-flow and radial-flow turbocharger rotors to ISO 21940 grades G0.4 and G2.5

More frequently asked questions

24/7 Emergency Support — +880 1730-067280

Call Us

Ready to Solve Your
Machinery Challenge?

Fast, no-obligation quote from our engineering team — services or projects

Credentials & Partnerships

Napier AuthorizedVVK TurboTechGarrett MotionJAKATGShakti TurbineiMAKEM Services (India) Private Limited