Bangladesh Limited

S.03

Precision Dynamic and On-Site Balancing

RotoTech’s balancing service restores smooth, stable running across a wide range of rotating equipment. We work in our precision workshop or at your site, whichever suits your operation. We balance rotors up to 5 tonnes to grades as fine as G0.4 under ISO 21940, with minimal downtime.

5 tonnes
Rotors up to
G0.4
Finest balance grade, ISO 21940
24/7
Emergency support

Overview

Smooth, stable running for your critical rotating equipment

Unbalanced rotors are one of the most common and most costly causes of machine problems. Even a small residual unbalance can generate harmful vibration that spreads through the shaft, bearings, seals, casing and foundation. The result is premature bearing wear, seal leakage, loosened fasteners, structural fatigue, reduced efficiency and unplanned shutdowns.

    Request a quote
    Collaboration with our valued customer

    What we do

    What we do

    We provide dynamic balancing for a broad range of rotors, including:

    1. Electric motors and alternators
    2. Multistage pumps and recycle pump rotors
    3. Steam turbine rotors
    4. Turbochargers
    5. Impellers
    6. ID and FD fans
    7. Rubber coupling rotors
    8. Crusher rotor
    9. Industrial separator rotor
    10. Compressor rotors
    11. And many other rotating components

    ISO 21940

    Fine balance grades, compliant with ISO 21940

    Dynamic balancing of steam turbine rotor

    We balance to grades as fine as G0.4, in line with ISO 21940. This matters most for high-speed and precision machinery, where even a very small residual unbalance can have a large effect on vibration and bearing life.

    Workshop facility

    Heavy rotors on a precision in-house dynamic balancing facility

    Balancing of alternator rotor

    Our in-house precision dynamic balancing facility is equipped to handle rotors weighing up to 5 tonnes, enabling us to serve a wide range of industrial applications, from high-speed rotating components to large, heavy-duty equipment. Backed by decades of combined technical experience, our team provides precision balancing services for turbine, turbocharger, Crusher Rotor, multistage pump rotors, large impellers, shafts, ID & FD fans, and any other rotating assemblies. By identifying and correcting mass imbalance, we help minimize vibration, reduce bearing loads, improve operational stability, and extend equipment service life.

    With a focus on accuracy, reliability, and efficient turnaround, our facility supports both individual repair requirements and ongoing industrial maintenance needs. Whether balancing is required as part of an overhaul or as a standalone service, we deliver dependable, technically sound solutions tailored to our customers' operational requirements.

    • Dynamic balancing of multistage pump rotor

      Dynamic balancing of multistage pump rotor

    • Dynamic balancing of multistage pump rotor

      Dynamic balancing of multistage pump rotor

    • Dynamic balancing of steam turbine rotor

      Dynamic balancing of steam turbine rotor

    • Dynamic balancing of steam turbine rotor

      Dynamic balancing of steam turbine rotor

    • Balancing of alternator rotor

      Balancing of alternator rotor

    • Balancing of recycle pump rotor

      Balancing of recycle pump rotor

    • Balancing of locomotive TC rotor

      Balancing of locomotive TC rotor

    • Balancing of axial TC rotor

      Balancing of axial TC rotor

    • Balancing of coupling rotor

      Balancing of coupling rotor

    On-site

    On-site balancing

    On-site balancing

    Some rotors can’t be shipped, and some downtime windows are too short for it. In those cases we bring our balancing capability to your plant and balance the rotor in its own bearings, under real operating conditions. This avoids dismantling and transport, and helps you return to production sooner.

    • On-site balancing

      On-site balancing

    • On-site balancing

      On-site balancing

    • On-site balancing

      On-site balancing

    • On-site balancing

      On-site balancing

    Our approach

    Our approach

    AssessmentWe review the equipment, its operating speed, the vibration history and the balance requirement.
    MeasurementWe record the initial unbalance and vibration condition.
    CorrectionWe apply precise corrections in the correct planes, following the agreed balance grade.
    VerificationWe re-check the rotor after correction to confirm it meets the target tolerance.
    ReportingYou receive a clear balancing report documenting the initial condition, the correction made and the final result.

    What you gain

    What you gain

    • Reduced vibration for smoother, quieter operation
    • Longer bearing and seal life, with fewer replacements
    • Restored operating efficiency and lower energy loss
    • Extended equipment life and better reliability
    • Minimal downtime, with on-site service when you can’t ship the rotor
    • Documented results you can use for your maintenance records and quality compliance

    Where we work

    Where we work

    01In our workshopPrecision balancing in a controlled environment, with repeatable, accurate results. Ideal for rotors that can be removed and sent to us, and for overhauls where balancing is part of the refurbishment.
    02At your facilityOur balancing capability brought directly to your equipment. Ideal for large or installed machinery, time-critical situations and sites where removing the rotor is impractical.

    Who we serve

    Who we serve

    Power plants, process industries, cement and heavy industry, food & beverage industry, textile industry, marine and engine operators, and any facility that depends on rotating equipment running reliably.

    1. Power plants
    2. Process industries
    3. Cement and heavy industry
    4. Food & beverage industry
    5. Textile industry
    6. Marine and engine operators

    FAQ

    Frequently Asked Questions

    Why balance a rotor?

    Even a small residual unbalance can generate harmful vibration that spreads through the shaft, bearings, seals, casing and foundation. The result is premature bearing wear, seal leakage, loosened fasteners, structural fatigue, reduced efficiency and unplanned shutdowns.

    How large a rotor can you balance?

    Our in-house precision dynamic balancing facility is equipped to handle rotors weighing up to 5 tonnes, enabling us to serve a wide range of industrial applications, from high-speed rotating components to large, heavy-duty equipment.

    To what standard do you balance?

    We balance to grades as fine as G0.4, in line with ISO 21940. This matters most for high-speed and precision machinery, where even a very small residual unbalance can have a large effect on vibration and bearing life.

    What equipment can you balance?

    We provide dynamic balancing for a broad range of rotors, including:

    • Electric motors and alternators
    • Multistage pumps and recycle pump rotors
    • Steam turbine rotors
    • Turbochargers
    • Impellers
    • ID and FD fans
    • Rubber coupling rotors
    • Crusher rotor
    • Industrial separator rotor
    • Compressor rotors
    • And many other rotating components

    Can you balance at our site?

    Some rotors can’t be shipped, and some downtime windows are too short for it. In those cases we bring our balancing capability to your plant and balance the rotor in its own bearings, under real operating conditions. This avoids dismantling and transport, and helps you return to production sooner.

    Do you provide a balancing report?

    You receive a clear balancing report documenting the initial condition, the correction made and the final result.

    More frequently asked questions

    24/7 Emergency Support — +880 1730-067280

    Call Us

    Balance it right.
    Run it longer.

    Talk to our technical team about your rotor, whether it’s a routine overhaul or an urgent vibration problem.

    asifur.prantik@rototechbd.com 01897608105

    Credentials & Partnerships

    Napier AuthorizedVVK TurboTechGarrett MotionJAKATGShakti TurbineiMAKEM Services (India) Private Limited